產品出廠規范

商品名稱：半導體熱電致冷芯片
型 號：TECl一一系列按致冷組件參數表所列
　     TESl一一系列包括微型及多級器件
包裝要求：外包裝箱為標準瓦楞出口紙箱，內裝泡沫硬盒(不同型號數量不一)。
外箱尺寸為515*280*300mm
技術參數及檢驗要求：
1．每裝運一批次必須隨附檢驗報告。
2．本公司的檢驗合格報告，證明所檢貨物與為供貨方提供的樣品的參數一致。
本公司的詳細檢驗項目如下：
(1)外觀檢驗，包括：a．輕缺陷：表面及邊緣的缺損及不規則：
b．輕缺陷：表面孔狀缺陷；
c．輕缺陷：瓷板面及導線有污漬：
d．重缺陷：外型的不完整，如斷裂或有細微裂紋。
(2)參數及尺寸檢驗：a．陶瓷尺寸規格：按客戶要求．型號與致冷器件參數表一致：
b．阻抗規格：同上：
c．負載電流規格：在額定電壓情況下，與參數表一致：
d．每一致冷片必須帶有兩根引線，一根為紅色．一根為黑色，長度按客戶要求。
引線位置為：致冷面朝上，引線朝下本公司產品平均質量水平AQL值為1．5。

Product standards
Item: I thermoelectric module
Model： TEC1 series: refer to thermoelectric Module specification Table
TES1 series includes mini type and multistage units
Package: Outer package: corrugated export case
Inter package: hard foam case (Various quantity to each type)
Outer size: 515*280* 330mm
Technical reference and check requirement 10ne quality check report attached to
each batch 2 the quality check pass report testifies that the product is of the
equal reference to the samples.
Content of qual ity check:
(1)Appearance:
a. Light defect: and irregularity of surface and edges;
b. Light defect: hole like defect on surface;
c. Light defect: sewage on ceramic plate or leads;
d. Heavy defects: lace of black heat shrinkable tube on the connecting terminal
of the TE module.
(2)Check of reference and size:
a. Standards of ceramic part: in accordance with client requirement.
b. Standards of resistance: in accordance with client requirement.
c. Standards of loading current: in accordance with specification table in the
range of rated voltage.
d. Position of leads: when cold surface is upward, the leads are downward.
Average quality level (AQL)of our products is 1.5.